In this article
- Why the flat-rolled duties did not lapse
- EU anti-dumping duty aluminium China: what each measure covers
- Flat-rolled products (CN 7606 and 7607)
- Extrusions (CN 7604, 7608 and 7610)
- The rates still in force
- Timeline: when each decision lands
- Alternative origins and the Gulf supply gap
- What to check before closing 2027 purchases
On 9 October 2026, the European Commission opened an expiry review of its anti-dumping duties on aluminium flat-rolled products from China, MLex reported. The duties were due to expire the following Monday. Instead, they stay in force while the review runs, as Shanghai Metals Market confirmed on 25 October. As a result, the EU anti-dumping duty aluminium China file now has two open fronts. The measures on Chinese extrusions have also been under expiry review since March.
Together, the two reviews cover the semi-finished families that Europe imports most from China. On one side sit sheet, coil and foil under CN 7606 and 7607. On the other sit profiles, bars and tubes under 7604, 7608 and 7610. Neither set of duties has lapsed. However, both reviews end in 2027, so the outcome lands inside the period when buyers and mills negotiate annual contracts.
This note sets out what each measure covers by CN code, which rates still apply and how the timelines run. It also lists what to check before closing 2027 volumes. It does not forecast the outcome of either review.
Why the flat-rolled duties did not lapse
An expiry review asks one question. Would letting the measures expire lead to “renewed dumping and injury”? That is the test the Commission set out when it opened the flat-rolled review, according to MLex. The trigger was a request that European Aluminium filed in June.
Meanwhile, the duties keep applying at the border. For an importer of Chinese sheet, coil or foil, the duty line in the cost sheet does not change for now. In parallel, Chinese producers had seven days from publication to send their sampling information, SMM reports. That step matters. Sampling decides which exporters the Commission examines in detail, so it feeds into any future company-specific rates.

EU anti-dumping duty aluminium China: what each measure covers
The two measures have different scopes. Therefore, the first check for any buyer is to cross each SKU against the codes below, using the full product description and not the heading alone.
Flat-rolled products (CN 7606 and 7607)
The Hong Kong Trade and Industry Department summarised the scope in its Circular 96/2026, based on EU notice C/2026/499. The measure covers:
- coils, sheets and circles from 0.2 mm to 6 mm thick;
- plates thicker than 6 mm;
- coils and strips from 0.03 mm to less than 0.2 mm.
The listed subheadings are 7606 11, 7606 12, 7606 91 and 7606 92, plus 7607 11 and 7607 19. In other words, thin strip down to 0.03 mm sits inside the scope, not only sheet and plate. SMM describes the same range as 0.03 mm to more than 6 mm, in coil, cut sheet and circle form.
Extrusions (CN 7604, 7608 and 7610)
The extrusion review started under notice C/2026/1920, according to the department’s Circular 284/2026. It covers bars, rods, profiles, tubes and pipes with no more than 99.3% aluminium. The codes under 7604 are ex 7604 10 10, ex 7604 10 90, 7604 21 00, 7604 29 10 and 7604 29 90. Under 7608 and 7610, they are ex 7608 10 00, 7608 20 81, 7608 20 89 and ex 7610 90 90.
The exclusions deserve as much attention as the scope. Welded or assembled sub-assemblies, welded tubes and ready-to-assemble kits fall outside this measure. For example, a buyer of components may face a different duty position than a buyer of bare profile in the same alloy. The “ex” prefix also matters, since only part of that code falls under the measure.
The rates still in force
Both measures combine a residual rate with lower individual rates for named producers. The table below sums up the public figures.
| Measure | CN headings | Duty range | In force since |
|---|---|---|---|
| Flat-rolled products | 7606, 7607 | 14.3% to 24.6% | 12 July 2022 |
| Extrusions | 7604, 7608, 7610 | 21.2% to 32.1% | 30 March 2021 |
For flat-rolled products, the residual rate of 24.6% applies to the net, free-at-Union-frontier price, per TID. Individual rates run from 14.3% to 21.4% for certain companies. For extrusions, Mysteel reports a range of 21.2% to 32.1%.
As a result, the duty depends on the producer, not only on the country. Two Chinese suppliers of the same product can carry different rates. In addition, the duty stacks on top of the regional premium and freight. Those two items move the delivered price on their own, as we explained in our note on aluminium premiums in Q4 2026.

Timeline: when each decision lands
For extrusions, the measures date from 30 March 2021 and were due to expire on 31 March 2026, Mysteel reports. European Aluminium filed its request in December 2025. The review must conclude within 12 months, and in no case later than 15 months after the notice appeared. Counting from late March 2026, that places the decision between late Q1 and late Q2 2027.
For flat-rolled products, the review opened on 9 October 2026. Its deadline runs from the notice of initiation, so buyers should read the date in the Official Journal itself.
Meanwhile, both sets of duties keep applying. Therefore, any contract for early 2027 delivery runs under the current rates. The review outcome can then change the duty position in the middle of a contract. There are two broad outcomes: the Commission extends the measures, or it lets them expire. Each one carries a different landed cost, and the public record does not yet point to either.
Alternative origins and the Gulf supply gap
Sourcing outside China is the obvious way around the duties. However, one of Europe’s natural suppliers is still short of metal. Gulf production remains about 2.6 Mt annualised below pre-conflict levels, according to Reuters on 14 October, as cited by Discovery Alert. EGA has restarted 631 of the 1,262 pots at Al Taweelah. The company aims for full output in the first quarter of 2027.
The wider market also sends mixed signals. LME three-month aluminium closed at US$3,008/t in the 22-23 October session, against a peak of US$3,787.50/t in early June. At the same time, LME registered stocks of about 238,625 t sit at the lowest level this century. So a change of origin is a decision about availability and landed cost together, not only about the duty line.
Secondary metal is another route, with its own CBAM and scrap-duty questions. We covered those in our note on secondary aluminium sourcing.
What to check before closing 2027 purchases
None of this is a recommendation to buy, sell or hedge. Instead, it is a list of the mechanisms that move landed cost.
- Cross every SKU against CN 7604, 7606, 7607, 7608 and 7610, including the “ex” lines.
- Confirm the individual rate of each Chinese supplier, because the residual rate applies where none exists.
- Review contract clauses on duty changes, since a review outcome can arrive mid-contract.
- Include the anti-dumping duty in the 2027 landed-cost model, next to premium and freight.
- For extruded parts, check whether a kit or sub-assembly falls under the exclusions.
- Keep origin documents complete and traceable in case of an anti-circumvention inquiry.
- Add CBAM to the total-cost view, as set out in our note on CBAM for downstream aluminium products.
- Follow the Official Journal of the EU for deadlines and final regulations.
For a European buyer, the EU anti-dumping duty aluminium China question is a 2027 contracting variable, not a closed file. Allinx can quote material delivered to destination and analyse the origin and applicable duty for each product. It can also supply that material with the group’s own logistics, including its own team in Shenzhen. What it does not do is quote a future price. The duty position and the delivered cost it quotes are the ones that apply today.
Technical notes on aluminum and metallurgical materials, in your inbox
New Insights articles on melt treatment, alloys, sourcing and logistics. Unsubscribe anytime.